fbpx

Select your language

Attenzione! L'azienda rimarrà chiusa dal 12 al 25 agosto 2024. Tutti gli ordini pervenuti in queste date verranno evasi a partire dal 26 agosto 2024.

Results 121 - 144 of 151
Grid

Top ten Products

Caleffi valve adapter

SKU: 01333-3000-00
8,30 €

Plastic radiator valve adapter to fit M30 digital thermostatic head to Caleffi valve.

TTD101 Digital Thermostatic Head

SKU: 01333-0004-00
35,37 €

TTD101: stand alone digital thermostatic head designed to detect the room temperature and automatically regulate the radiator water flow. Manual programming or via TTD USB Programmer cable (not included).

Adapter for coupling thermostatic and electrothermal controls with GIACOMINI valves

Products

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

Model: 01334-6090-00
Installation: built-in
System type: fan coil
Systems control: 4 pipes
Fan speed control: 0-10 Vdc

A charging station for electric vehicles, with a power of 7 kW, and a Modbus communication interface. The device can also be controlled via the MyVirtuoso Home smart home system. Equipped with a convenient display for charging management.

Wall-mounted wireless thermostat WMTE-120

SKU: 01334-0040-00
53,38 €

NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
Wall-mounted wireless thermostat WMTE-120, measures zone temperature and sends commands to power on/off the receiver control units.

Perfect for managing the room temperature and domestic hot water. Compatible only with boilers that support the OpenTherm protocol.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

Digital thermostatic head TTDZ2

SKU: 01335-1011-00
108,58 €

The TTDZ2 digital thermostatic head, following the indications received from the MyVirtuoso Home system, will open or close the radiator thermostatable valve, ideally regulating its temperature.

NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
Wall-mounted wireless thermostat WMTE-120, measures zone temperature and sends commands to power on/off the receiver control units.

The temperature and humidity sensor with display and setpoint adjustment is the device that helps you in managing the temperature and humidity of the environment and in adjusting the setpoint.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

The receiver unit HCE-08 receives information from the WMTEs programmable thermostats and acts as an actuator, turning on and off solenoid valves and control devices for heating/cooling installations (boilers, fan coil units, convection heaters, air conditioners, etc.).

The Z-Wave zone thermostat for fan coils with fan regulation at 0-10 Vdc is a highly reliable and practical device for optimal control of the fan coils and the fan.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

Thermo electric actuator WMTE-1037

SKU: 01334-3000-00
32,94 €

The WMTE-1037 thermo electric actuator is the ideal solution for managing hydronic and underfloor heating systems.

The zone thermostat for fan coils with 3-speed fan adjustment is a highly reliable and practical device for optimal control of the fan coils and the fan. The device, equipped with a built-in temperature sensor, will automatically adjust the fan speed according to the detected ambient temperature.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

The zone thermostat for fan coils with 3-speed fan adjustment is a highly reliable and practical device for optimal control of the fan coils and the fan. The device, equipped with a built-in temperature sensor, will automatically adjust the fan speed according to the detected ambient temperature.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

External 10K NTC sensor with 3 m cable

SKU: 01335-1857-00
20,74 €

External 10K NTC sensor with 3 m cable for temperature and humidity measurement.

Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.

External NTC sensor with 15 m cable

SKU: 01335-1856-00
54,90 €

External 10K NTC sensor with 15m cable for temperature measurement.

Page 6 of 7

Filtri

Fast Delivery
 
Secure payment and encrypted data
 
Payments: CC or Paypal, Bank transfer

Iscriviti alla newsletter

per ricevere sconti, promozioni e informazioni sugli ultimi progetti

EcoDHOME.com powered by

SmartDHOME Srl
V.le Longarone, 35
20058 Zibido San Giacomo (Mi)

800 020 346