Select your language
Attenzione! L'azienda rimarrà chiusa dal 12 al 25 agosto 2024. Tutti gli ordini pervenuti in queste date verranno evasi a partire dal 26 agosto 2024.
Top ten Products
Caleffi valve adapter
Plastic radiator valve adapter to fit M30 digital thermostatic head to Caleffi valve.
TTD101 Digital Thermostatic Head
TTD101: stand alone digital thermostatic head designed to detect the room temperature and automatically regulate the radiator water flow. Manual programming or via TTD USB Programmer cable (not included).
Adapter for Giacomini valves with M30 quick pitch and thermostatic heads
Adapter for coupling thermostatic and electrothermal controls with GIACOMINI valves
Products
Ultrasonic Heat/Cool meter DN20 average flow rate 2.5 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
Built-in thermostat for fancoil with 4 pipes and 0-10 Vdc fan with Modbus
Model: 01334-6090-00
Installation: built-in
System type: fan coil
Systems control: 4 pipes
Fan speed control: 0-10 Vdc
7 kW WBSH2-7 Charging Wall Box with display and Modbus
A charging station for electric vehicles, with a power of 7 kW, and a Modbus communication interface. The device can also be controlled via the MyVirtuoso Home smart home system. Equipped with a convenient display for charging management.
Wall-mounted wireless thermostat WMTE-120
NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
Wall-mounted wireless thermostat WMTE-120, measures zone temperature and sends commands to power on/off the receiver control units.
Wi-Fi chronothermostat compatible with OpenTherm boilers
Perfect for managing the room temperature and domestic hot water. Compatible only with boilers that support the OpenTherm protocol.
Ultrasonic Heat/Cool meter DN25 average flow rate 3.5 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
Digital thermostatic head TTDZ2
The TTDZ2 digital thermostatic head, following the indications received from the MyVirtuoso Home system, will open or close the radiator thermostatable valve, ideally regulating its temperature.
Kit wall-mounted wireless thermostat WMTE-120 and receiver control unit
NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
Wall-mounted wireless thermostat WMTE-120, measures zone temperature and sends commands to power on/off the receiver control units.
Temperature and humidity sensor and setpoint adjustment
The temperature and humidity sensor with display and setpoint adjustment is the device that helps you in managing the temperature and humidity of the environment and in adjusting the setpoint.
Ultrasonic Heat/Cool meter DN32 average flow rate 6.0 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
Receiver control unit HCE-08 for WMTE (8-channel model)
The receiver unit HCE-08 receives information from the WMTEs programmable thermostats and acts as an actuator, turning on and off solenoid valves and control devices for heating/cooling installations (boilers, fan coil units, convection heaters, air conditioners, etc.).
Zone thermostat for 2-pipe fancoil with 0-10 Vdc fan regulation
The Z-Wave zone thermostat for fan coils with fan regulation at 0-10 Vdc is a highly reliable and practical device for optimal control of the fan coils and the fan.
Ultrasonic Heat/Cool meter DN40 average flow rate 10.0 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
Thermo electric actuator WMTE-1037
The WMTE-1037 thermo electric actuator is the ideal solution for managing hydronic and underfloor heating systems.
Thermostat for 2-pipe fan coil and 3-speed fan
The zone thermostat for fan coils with 3-speed fan adjustment is a highly reliable and practical device for optimal control of the fan coils and the fan. The device, equipped with a built-in temperature sensor, will automatically adjust the fan speed according to the detected ambient temperature.
Ultrasonic Heat/Cool meter DN50 average flow rate 15.0 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
Thermostat for 4-pipe fan coil and 3-speed fan
The zone thermostat for fan coils with 3-speed fan adjustment is a highly reliable and practical device for optimal control of the fan coils and the fan. The device, equipped with a built-in temperature sensor, will automatically adjust the fan speed according to the detected ambient temperature.
Ultrasonic Heat/Cool meter DN65 average flow rate 30.0 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
Ultrasonic Heat/Cool meter DN65 average flow rate 30.0 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
External 10K NTC sensor with 3 m cable
External 10K NTC sensor with 3 m cable for temperature and humidity measurement.
Ultrasonic Heat/Cool meter DN65 average flow rate 30.0 m3/h with ModBus interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
External NTC sensor with 15 m cable
External 10K NTC sensor with 15m cable for temperature measurement.
Filtri
EcoDHOME.com powered by
SmartDHOME Srl
V.le Longarone, 35
20058 Zibido San Giacomo (Mi)
800 020 346